Iq-17 Toner Image Detection Color Stripes - Xerox Phaser 7500 Service Manual

IQ-17 Toner Image Detection Color Stripes

Phaser 7500 Printer Service Manual
At Near Empty state, if a customer had removed the Cartridge and knocked on it
to collect the toner towards the exit in attempt to use the very last bit of toner, it
may cause color stripe deterioration.
This can also be caused by a toner cartridge that is exposed to a temperature
exceeding 127º F (53º C) for a short period of time.
Cause
• This error occurs when soft block shaped (clumped) toner is being supplied to
the Developer. The lines are more visible when printing high density images.
Initial Actions
• Check the paper transfer path.
• Ensure there are no debris on the transfer path.
Troubleshooting Reference
Applicable Parts
Toner Cartridge, PL5.1.1-4
■
Troubleshooting Procedure
Step Actions and Questions
1 Use a new Toner Cartridge and check whether the problem disappears
by itself.
The problem should disappear by itself after running enough Solid Fill
prints to purge the toner supply system.
Print-Quality Troubleshooting
Example Print
Toner Image Detection Color Stripes
5-45