MK_Emergency_Enforced_Stop
Phaser 7500 Printer Service Manual
MK internal mismatch (the MM has performed a forced stop process).
Applicable Chain-Link Code
•
045-352: MK_Emergency_Enforced_Stop
Initial Actions
•
Power cycle the printer.
•
If the problem persists, follow the procedure below.
Troubleshooting Reference
Applicable Parts
MCU PWB, PL18.3.6
■
1. Turn the power Off and On.
2. Restore NVRAM. If the problem persists, replace the MCU PWB (REP 18.12,
page
8-202).
Error Messages and Codes
Wiring and Plug/Jack Map References
3-141