Operation (Y/M/C) Toner Empty - Xerox Phaser 7500 Service Manual

Error Messages and Codes

Operation (Y/M/C) Toner Empty

Applicable Chain-Link Codes
Initial Actions
3-84
Printing cannot be continued was detected during color printing because Y toner
has run out. Or, color printing was specified when printing cannot be continued
because (Y/M/C) toner has run out.
024-923: Y Toner Cartridge Empty
•
• 024-924: M Toner Cartridge Empty
024-925: C Toner Cartridge Empty
•
• Check the Toner Cartridge life.
• If the problem persists, follow the procedure below.
Troubleshooting Reference
Applicable Parts
Toner Cartridge, PL5.1.1-5.1.4
■
1. Replace the appropriate Toner Cartridge (REP 1.1,
2. If the problem persists, refer to
the sensor.
3. If the problem still persists, perform the following:
• "Common System Fail" on page 3-22
• "IOT System Fail" on page 3-27
Wiring and Plug/Jack Map References
page 8-9).
"General Sensor Failure" on page 3-28
Phaser 7500 Printer Service Manual
to check