Error Messages and Codes
MK_MKIF_MSG_Reject
Applicable Chain-Link Code
Initial Actions
3-134
Communication error between IM and MK (the received message was rejected).
•
045-331: MK_MKIF_MSG_Reject
•
Power cycle the printer.
•
If the problem persists, follow the procedure below.
Troubleshooting Reference
Applicable Parts
MCU PWB, PL18.3.6
■
1. Turn the power Off and On.
2. Restore NVRAM. If the problem persists, replace the MCU PWB (REP 18.12,
page
8-202).
Wiring and Plug/Jack Map References
Phaser 7500 Printer Service Manual