Xerox Phaser 7500 Service Manual page 911

Phaser 7500 Printer Service Manual
Print Engine Plug/Jack Designators (Continued)
P/J Map Coordinates Remarks
633 1 G-108
700 1 I-105
701 1 F-104
701 6 F-109
702 3 I-107
800 5 D-139
801 5 D-139
3001 5 E-135
5111 12 C-223
5112 N/A N/A
5161 9 A-181
7003 5 D-135
Plug/Jack and Wiring Diagrams
Connection between the ATC PWB (PL5.2.18) and
the Wire Harness (Main Front) (PL18.4.5)
Connection between the Console Harness
(PL19.2.14) and the Wire Harness (UI) (PL18.1.8)
Connection between the Control Panel
(PL19.2.13) and the Console Harness (PL19.2.14)
Connection between the Control Panel and UI.
Connection between the Image Processor Board
and Back Plane PWB.
Connection between the TM Relay PWB
(PL18.3.11) and the Tray Module (Option)
Connection between the TM Relay PWB
(PL18.3.11) and the Wire Harness (Tray)
(PL18.3.13)
Connection between the Wire Harness (ESS2)
(PL18.3.12) and the Wire Harness (ESS1)
(PL18.2.9)
Connection between the Exit Motor (PL17.1.15)
and the Wire Harness (Main LH) (PL18.4.2)
Connection between the Exit Sensor Full Sensor
and the Wire Harness (Main LH) (PL18.4.2)
Connection between the Thermo Sensor
(PL18.1.14) and the Wire Harness (Main RH)
(PL18.4.3)
Connection between the Wire Harness (BP)
(PL18.3.3) and the Wire Harness (UI) (PL18.1.8)
10-11