Rep 8.10 Drive Shaft Assembly - Xerox Phaser 7500 Service Manual

REP 8.10 Drive Shaft Assembly

PL8.2.12
Phaser 7500 Printer Service Manual
1. Remove the Gear Bracket Assembly (REP 8.9,
2. Remove the KL Clip that secures the Gear and remove the Gear.
3. Remove the Sleeve Bearing.
4. Shift the Drive Shaft Assembly to the rear temporarily, and remove the Drive
Shaft Assembly from the front.
Service Parts Disassembly
page 8-78).
s7500-133
8-79