Xerox Phaser 7500 Service Manual page 625

Phaser 7500 Printer Service Manual
3. Remove 1 screw (silver, Tapped, 8mm) that secures the Lock Tension Plate to
the IBT Belt Unit and remove the Lock Tension Plate.
4. Install the Lock Tension Plate at the given position on the IBT Belt Unit by
reusing the screw that was removed in the previous step.
5. Remove the Inlet Chute (PL6.3.2)
6. Remove 1 screw that secures the BUR Front Frame (PL6.3.3).
7. Remove the BUR Front Frame.
8. Remove the Backup Roller Assembly (PL6.3.4).
9. Remove the IBT Belt (PL6.3.6).
10. Install the new IBT Belt on the assembly. Make sure the reflective patch
(PL6.3.7) is positioned on the rear of the assembly.
11. Follow steps 8 to 1 in reverse order.
Service Parts Disassembly
s7500-498
8-63