REP 4.2 Rear Duct/ Fuser Fan Duct/ Rear Fuser Duct
PL4.1.4/ PL4.1.5/ PL4.1.8
Phaser 7500 Printer Service Manual
1. Remove the Top Rear Cover and the Rear Cover (REP 19.6,
2. Remove the Right Cover (REP 19.8,
3. Remove the PWB Chassis Unit (REP 18.10,
4. Release the 2 hooks that secure the Duct Rear and remove the Duct Rear.
•
Release the top latch first in order to release the bottom latch.
5. Remove 1 screw (silver, 6mm) that secures the Fuser Fan Duct and remove the
Fuser Fan Duct.
6. Remove 1 screw (silver, 6mm) that secures the Rear Fuser Duct, release the
hook that is attached to the Rear Upper Frame and remove the Rear Fuser
Duct.
Service Parts Disassembly
page
page
8-219).
page
8-197).
Fuser Fan Duct
Rear Fuser Duct
Rear Duct
8-217).
s7500-093
8-39