Service Parts Disassembly
LED Print Head
REP 2.1 LED Print Head (LPH) Unit (Y/M/C/K)
PL2.1.2
8-18
1. Remove the Waste Cartridge (REP 1.3,
2. Remove the Front Cover Assembly and the Inner Cover Assembly (REP 19.1,
page
8-207).
3. Remove the ATC Sensor Board (REP 5.6,
4. Remove the Waste Toner Pipe Assembly (REP 8.6,
5. Remove the Deve Plate Assembly (REP 5.4,
6. Remove the Developer Housing Assembly (K) (REP 5.5,
Note
Do not apply force to the LPH positioning pin.
7. Remove the screw (silver, 6mm) that secures the LPH Unit (K).
8. Pull and raise the LPH Unit (K) to remove it.
page
8-12).
page
8-52).
page
8-75).
page
8-49).
page
8-50).
Positioning Pins
LED Print Head Unit (K)
Phaser 7500 Printer Service Manual
s7500-073