016-782/ 016-784 Fail - Xerox Phaser 7500 Service Manual

Hide thumbs Also See for Phaser 7500:

Table of Contents

016-782/ 016-784 Fail

Phaser 7500 Printer Service Manual

1. Check [Server Name/IP Address] with the Address List.

WinNT 4.0: If IP address is specified, SMB transfer to WinNT 4.0 becomes

unavailable. Change [Server Name/IP Address] to a host name.

Win XP: SMB transfer is available even with IP Address.

2. Perform the following procedures to check for the failure where SMB transfer is

unavailable via the Address List.

Add this product machine to a domain.

Set a local user and password in the PC storage server (or a domain client

higher than WIN workstation).

This local user and password = the user and password in the Address List.

Grant the permission for the user that has been created in the scan data

storage folder of the PC storage server (or the domain client higher than

WIN2000) in Step (2) (for NTFS, FAT32 is not used). After that, share the

folder and set the permission for sharing.

The workgroup name in the SMB properties shown from the appropriate

device internet service = the same as the domain (a) to be used as a

domain name.

If the procedure in (a) is inappropriate, the error 016-782 occurs. If the

procedures in (b) and (c) are inappropriate, the error 016-784 occurs.

If the problem persists after performing this procedure, perform the

"Common System Fail" on page

Error Messages and Codes