Smh Stop Check - Xerox Phaser 7500 Service Manual

Hide thumbs Also See for Phaser 7500:

Table of Contents

Error Messages and Codes

SMH Stop Check

Applicable Chain-Link Code

Initial Actions

Tray 1 stopped running due to an obstruction.

024-985: SMH Stop check

Inspect the tray to ensure that it is free of obstructions, is loaded with

supported paper, and the Guides are adjusted correctly.

If the problem persists, follow the procedure below.

Troubleshooting Reference

Applicable Parts

1. Check the paper size/paper orientation/paper type settings and press Paper

2. If the problem still persists, perform the

Wiring and Plug/Jack Map References

"Common System Fail" on page

Phaser 7500 Printer Service Manual

Do you have a question about the Phaser 7500 and is the answer not in the manual?