First Print Output Time - Xerox Phaser 7500 Service Manual

First Print Output Time

Phaser 7500 Printer Service Manual
First Print Output Time (FPOT) is defined as the time from when the engine
receives a Start signal in Ready state, until a single page is printed and delivered to
the output tray.
The following conditions are applied:
• The Controller does not keep the print engine waiting.
• The printer prints at Simplex mode.
• The printer is at Standby mode (ROS Motor Off, Fuser Ready).
• Paper is A4 size Long-Edge Feed (LEF).
Condition
FPOT from E-Star
Mono FPOT from Ready
Color FPOT from Ready
Intra-job Mono and Color Switch
General Information
FPOT (sec.)
30 sec.
12 sec.
12 sec.
4.4 sec.
1-17