Table of Contents
Advertisement
Chapter 3 Rotea Protocol Builder Application
3
Define Kit
Kit Type
There are two kit types currently available, defined by the maximum flow rate that is possible using the
Single-Use Kit:
• 001 – Standard kit: Suitable for flow rates 4 to 110 mL/min
• 002 – High flow kit: Suitable for flow rates 6.5 to 180 mL/min. The Protocol Builder application
allows 6.5 mL/min to 165 mL/min for the High Flow Kit.
In the Kit Type box, select the required kit type from the dropdown menu:
Ensure that the kit type selected matches one the user has available for running protocols.
Note: A 2D Barcode on the underside of the kit frame is read by a 2D Barcode Reader in the
instrument on loading of the Single-Use Kit. The instrument will automatically verify that the Single-Use
Kit loaded is the correct kit type for the protocol to be run. Pump calibration settings will also be
automatically adjusted based on the kit type selected.
Once you have set at least one bag, filled in a description, chosen your kit type and filled in any of the
optional entries, select Confirm from the Define Kit screen to go to Step view.
Long Description
Long Description include instructions on how to run the protocol, including descriptions of any data
entry. You can enter any information required by the user in this section.
22
CTS
™
Rotea
™
Counterflow Centrifugation System Process Design User Guide
Advertisement
Table of Contents
