Step view
Protocols comprise individual steps. Each step is automatically assigned a sequential number as it is
created.
Step numbers are displayed across the top banner and can be selected by clicking on the required
number. Where the number of steps exceeds the banner width, "<<, <, > and >>" will be added to the
banner to enable navigation.
Step view showing the first step in a new protocol
1
Fluid path and direction of flow
2
Choose Step Type and Triggers that determine when the step is complete
3
Operating parameters for the Centrifuge (G), Pump (mL/min) and Ramp Time (seconds)
CTS
™
Rotea
™
Counterflow Centrifugation System Process Design User Guide
Chapter 3 Rotea Protocol Builder Application
3
Step view
23