Cleaning And Decontamination; Safety And Electromagnetic Compatibility (Emc) Standards; Safety Standards - Thermo Scientific gibco CTS Rotea User Manual

Cleaning and decontamination

CAUTION! Cleaning and Decontamination. Use only the cleaning and decontamination methods
that are specified in the manufacturer user documentation. It is the responsibility of the operator (or
other responsible person) to ensure that the following requirements are met:
·
No decontamination or cleaning agents are used that can react with parts of the equipment or with
material that is contained in the equipment. Use of such agents could cause a HAZARD condition.
· The instrument is properly decontaminated a) if hazardous material is spilled onto or into the
equipment, and/or b) before the instrument is serviced at your facility or is sent for repair,
maintenance, trade-in, disposal, or termination of a loan. Request decontamination forms from
customer service.
·
Before using any cleaning or decontamination methods (except methods that are recommended by
the manufacturer), confirm with the manufacturer that the proposed method will not damage the
equipment.

Safety and electromagnetic compatibility (EMC) standards

The instrument design and manufacture complies with the following standards and requirements for
safety and electromagnetic compatibility.

Safety standards

Reference
EU Directive 2014/35/EU
IEC 61010-1
EN 61010-1
UL 61010-1
CAN/CSA C22.2 No.
61010-1
IEC 61010-2-020
EN 61010-2-020
IEC 61010-2-081
EN 61010-2-081
CTS ™ Rotea ™ Counterflow Centrifugation System Process Design User Guide
European Union "Low Voltage Directive"
Safety requirements for electrical equipment for measurement, control, and laboratory
use – Part 1: General requirements
Safety requirements for electrical equipment for measurement, control and laboratory
use – Part 2-020: Particular requirements for laboratory centrifuges
Safety requirements for electrical equipment for measurement, control and laboratory
use – Part 2-081: Particular requirements for automatic and semi-automatic laboratory
equipment for analysis and other purposes
Safety and electromagnetic compatibility (EMC) standards
Description
Appendix A Safety
A
123