E-Gel™ Simple Runner Electrophoresis Device
Catalog Number G8000
Pub. No. MAN0017211 Rev A.0
Components
E-Gel
Simple Runner Electrophoresis Device
™
Power cord with universal adapter
Specifications
Dimensions
Weight
Safety
Temperature
Built-in Features
Adaptor specifications
Use only suitably certified adapter marked LPS (Limited Power Source) or NEC Class 2
included with the E-Gel
supplied by the adaptor are shown in the following table.
Country
U.S. and Canada
Europe
Safety
Operation of the E-Gel
conditions.
•
Indoor use.
•
Maximum relative humidity: 80% (maximum relative humidity 80% for temperatures
up to 31ºC, decreasing linearly to 50% relative humidity at 40ºC).
•
Caution! Unit employs internal hazardous voltages. Do not open.
•
Mains supply voltage fluctuations not to exceed 10% of the nominal voltage (100–240 V,
50/60 Hz, 6.3 A).
•
Mains plug is a disconnect device and must be easily accessible.
•
The protection provided by the equipment may be impaired if the equipment is used in
a manner not specified by the manufacturer.
•
The device must be connected to a mains socket outlet with protective earthing
connections.
For Research Use Only. Not for use in diagnostic procedures.
12.5 cm x 13 cm x 13.5 cm
1.19 lbs (540 g) with adaptor
UL listed and CE certified
Ambient 15°C to 40°C
Alarm, light LED
Simple Runner Electrophoresis Device. Input and Output
™
Input
110–120 V AC, 60 Hz
220–240 V AC, 50 Hz
Simple Runner Electrophoresis Device is subject to the following
™
Amount
1 each
1 each
Output
12 V DC, 1 A
12 V DC, 1 A
Need help?
Do you have a question about the Invitrogen E-Gel G8000 and is the answer not in the manual?
Questions and answers