Thermo Scientific gibco CTS Rotea User Manual page 20

Chapter 3 Rotea Protocol Builder Application
3
Define Kit
Bag Configuration
To create a new bag, select the
1
REQUIRED: Enter a label for the bag here (maximum 20 characters). The name can be anything you want but should
be a logical reference for the operator of the instrument. This label will appear in multiple places throughout both the
Rotea Protocol Builder Application and the Rotea
is very important that the name given is clear and provides the user with an adequate understanding of the bags
function and/or contents.
2
REQUIRED: Select which valve the bag will be connected to for the protocol from the dropdown menu.
3
OPTIONAL: Set the volume of fluid that should be in the bag at the beginning of the protocol. This is used as a
reference so that the user can ensure there is enough fluid to run the protocol.
4
OPTIONAL: Enter the maximum volume the bag can contain, for user reference.
5
OPTIONAL: In the Description box you can enter a more detailed description for the bag (maximum 50 characters).
This is for reference only and can be anything you wish.
6
If the bag has a second connection, you can select one from the dropdown menu. Only valid options will be
presented.
7
Click Confirm to save the bag, or Cancel to return to the Define Kit screen.
20
to open the Bag Configuration window.
™ GUI as the primary way of identifying the function of the bag. It
CTS ™ Rotea ™ Counterflow Centrifugation System Process Design User Guide