Chapter 3 Rotea Protocol Builder Application
3
Loops
Edit using List view
1
Select whether you want the step to be inserted before or after the selected step.
2
Select the step number that you want the new step to be inserted before or after.
3
Click Confirm to add your new step.
When a single step is selected you have several options:
1
Duplicate the step at the designated location. The Copy To window is identical to the Insert Step window.
2
Move the step to the designated location. The Move To window is identical to the Insert Step window.
3
Add a label to your list view, which appears above the selected step. This can be used to divide your protocol into
sections, for ease of use.
4
Delete the selected step.
When two or more steps are selected you are left with the option to delete or move all currently selected
steps.
Note: If the selected steps are not all adjacent, they will be grouped together after the move.
Loops
Select any two steps in List view to bring up the option to create a loop of them and all steps between
them.
Click Repeat to bring up the Loop creation parameters:
42
CTS
™
Rotea
™
Counterflow Centrifugation System Process Design User Guide