Table of Contents
Advertisement
Operation
Section 2
The SHKE416HP and SHKE430HP are microprocessor-controlled
tabletop orbital shakers designed to accommodate a wide variety of flasks,
test tubes and other glassware. The control system, common for each, is
easily programmed and stores the user-defined time and speed settings
which remain in memory even when the shaker is turned off and
unplugged.
The computer-based speed controller continuously adjusts for line voltage
fluctuations and provides smooth start-ups and consistent RPM control.
The circuitry is designed to slowly bring the platform up to speed and
down to a stop to prevent liquid splashing from flasks or test tubes.
Warning The microprocessor speed control system may take up to one
minute to bring the platform up to speed. Never leave the shaker
unattended when starting it. Make sure all flasks and test tube racks are
firmly seated in the clips and check the security of the flask clip and
platform attachment screws weekly.
s
Optional Temperature
A factory-installed Temperature Monitoring kit enables in-flask
temperatures to be monitored and displayed on the control panel display
Monitor Kit
screen. A temperature probe is immersed in the medium and plugged into
a connector on the back panel of the shaker. The probe may also be used
to monitor ambient temperatures.
Figure 1-16 shows the location of the Temperature Probe Connector.
Thermo Scientific
Orbital Shakers
2-1
Advertisement
Table of Contents
