Preparing Mounting Kit With A Magnet (Optional) - Thermo Scientific Smart-Vue Installation Manual

Preparing mounting kit
with a magnet (optional)
Thermo Fisher Scientific
Your Smart-Vue end-point module includes a plastic holder so you can
mount the device easily on various surfaces. In addition to the provided
screws, you will also find a magnetic pad with adhesive backing that you can
use to adhere the holder to metal surfaces easily.
1. Clean the back of the holder with a mild cleanser or alcohol.
2. Remove the protection from the adhesive pad on the magnet and
place the magnet on the back of the holder
3. Place the holder and magnet down on a flat surface and press down
strongly for 30 seconds to firmly attach the magnet.
Smart-Vue Dry Contact Module Installation Guide
Installation procedure
9