Create Custom Particles; Edit Custom Particles And Custom Media - Thermo Scientific gibco CTS Rotea User Manual

Create custom particles

Within the Particle drop-down list is the option to select from Custom Particles previously created or
create a new particle.
1. Click on the Create new text in the drop-down list to bring up the Create New Particle screen.
2. Input the following parameters:
• New Particle Name
• Cell Density - minimum and maximum (kg/m
• Cell Diameter - minimum and maximum (microns)
• Compensation Factor
Note: The Compensation Factor will be applied to the cell diameter in the model and has a
default value 1.0 with a range between 0.1 and 10.
3. Click on Save to add the new custom particle to the dropdown list or Cancel to exit.

Edit custom particles and custom media

When custom particles and media are created, they are stored locally on the specific computer used to
create them. When a protocol is saved, any custom particles or media used in a process model will be
CTS ™ Rotea ™ Counterflow Centrifugation System Process Design User Guide
Chapter 5 Rotea
3
)
™ Process Model
5
Predict process settings
107