Table of Contents
Advertisement
6
The use of the Rotea
subsitute empirical data.
™
Rotea
Simulation software
The purpose of the Rotea
1. Simulate and visualize the total protocol including data entry variables to check that it functions as
intended.
2. Check that all fluid lines being used have been primed.
3. Determine the starting volume required in each bag to complete the protocol.
4. Check that each bag has sufficient capacity to hold the maximum volume that it will need to hold
at any point during the run.
5. Estimate the run time for each step and the overall protocol.
6. Check which triggers will be activated when the protocol runs.
™
The Rotea
Simulation software is access by clicking on the
Protocol Builder home screen.
™
The Rotea
Simulation software runs the protocol using all input variables and step settings as defined
within the protocol including Bag Volume, Bag Capacity, Flow Rate, G force and Triggers.
After opening the Rotea
defined in the protocol.
CTS
™
Rotea
™
Counterflow Centrifugation System Process Design User Guide
Rotea
™
Simulation software is for informational purposes only and is not intended to
™
Simulation software is to enable the user to:
™
Simulation software, the user will be prompted for any data entry values
™
Simulation software
icon in the top right corner of the
109
Advertisement
Table of Contents
