Vent Engine - Under Side - GE Datex-Ohmeda Aisys Carestation Reference Manual

10.17.1 Vent Engine - under side

1a 1a
1b
1c
5
Item Description
1 Interface Manifold, pneumatic engine
(with free breathing valve and mechanical overpressure valve)
O-ring, 12.42 ID x 15.98 OD (2)
1a Seat, free breathing valve
1b* Valve, flapper
1c O-ring
2 Fitting, 6.35-mm (1/4-inch)
3 Plug, 6.35-mm (1/4-inch)
4 Fitting, barbed
5 Manifold
6** Gasket, manifold
7 Plate, manifold
8*** Screw, M4x8 Pozidriv PAN
* If necessary, clean with alcohol before installing new; trim off flush with outside surface of seat
(refer to removed flapper).
** Install gasket into manifold. Check to see that it is properly positioned.
*** Carefully install plate onto manifold making sure not to disturb the gasket.
First, start all screws. Then, torque to 1.7 N-m (15 lb-in) using sequence shown.
M1046983 04/08
1
6
2
c
e
a
f
g
b
d
10 Illustrated Parts
3 4
7
8
Stock Number
1504-8505-000
1006-3615-000
1503-3204-000
0211-1454-100
1503-3208-000
1504-3621-000
1503-3245-000
1504-3014-000
1503-3843-000
1503-3845-000
1503-3844-000
1006-3178-000
10-25