4.5.9 Cal Config
Cal Config menu
M1046983 04/08
Before calibration, you must verify that the Ventilator Drive Gas and the
Altitude settings are set appropriately to match the current drive gas
configuration and machine location.
If you change any of the settings in the Cal Config menu, you must restart the
system.
Menu Item
Message text
Ventilator Drive Gas
Change drive gas to match
machine configuration.
Altitude
Change altitude used for gas
calculations.
4 Install/Service Menus
Values
Air, O2
–400 to 3000 m
(in 100-m increments)
4-27