Aisys
2.7 Anesthesia Control board
2.7.1 Overview
2-16
The Anesthesia Control board (A) uses a Motorola MCF5407 Coldfire microcontroller
with 4M Flash and 16M error correcting DRAM. The Anesthesia Control board includes
6 UARTs with a 64 byte FIFO and RS-422 communications to interface with the Display
Unit, an accessory port, and anesthesia delivery subsystems located in the pan
electronic enclosure. These include the Gas Mixer, Electronic Vaporizer, and the
Ventilator Interface board.
Figure 2-15 • Anesthesia Control board
A
04/08 M1046983