Side Views - GE Transport Pro Service Manual

Side Views

Revision A
Equipment Overview: Equipment Description
A B C
F
Left Side
Name
A Tram chute
B Tram module
C "Curly" data cable
D Data cable channel
E DC power connector
F Battery doors
Transport Pro Patient Monitor
2012659-002
Description
Connect the Tram chute to the display and insert
a Tram module to create a transport monitor.
Disconnect the Tram chute from the display to
use the display as a remote display.
Disconnect the Tram chute from the display to
allow for alternate or permanent mountings of
the transport monitor.
Insert a Tram module into the Tram chute to create
a transport monitor. See "Tram Module
Compatibility" on page 2-10 for a listing of
compatible Tram modules.
Connect to the Tram module and to the display.
The data cable provides communication between
the Tram module and the display.
Place the Tram module data cable in the channel
to reduce cable clutter.
See "Connectors" on page 3-8.
Open the battery doors to insert and remove the
batteries.
D
841A, 842A
E
Right Side
2-7