Stp Pump Specification - Edwards STP-iS2207 Series Instruction Manual

1.8

STP pump specification

1
External appearance, installation and unpacking method differ depending to the STP pump
specification. Refer to the followings:
Naming convention:
"C" following a pump model name indicates a corrosion resistant
(e.g. STP-iS2207C)
*1 Corrosion resistant: STP pump with anti-corrosive treatment.
The display unit iDT-001 is available as an optional accessory with the STP-iS2207 series.
The display unit operates the STP pump, confirms the pump status and sets various settings. (refer
to Section 6.2 and the Instruction Manual of the "Display Unit iDT-001".)
MT-89E-001-C
Page 10
STP-iS2207 Series Turbomolecular Pump
Standard type
(Without anticorrosion
treatment type)
STP-iS2207
Display unit iDT-001
Corrosion resistant type
STP-iS2207C
type.
*1