Stp Pump Specification - Edwards STP-iS1607 Series Instruction Manual

1.8

STP pump specification

External appearance, installation and unpacking method differ depending to the STP pump
specification. Refer to the followings:
(Without anticorrosion
Naming convention:
• "C" or "B" following a pump model name indicates a corrosion resistant
(e.g. STP-iS1607C)
• "B" following a pump model name indicates corrosion resistant
type.
(e.g. STP- iS1607B).
• "S" following a pump model name indicates a compatible
(e.g. STP-iS1607CS)
STP-iS1607 Series Turbomolecular Pump
Standard type
treatment type)
STP-iS1607/STP-iS1607C/STP-iS1607B
STP-iS1607S/STP-iS1607CS/STP-iS1607BS
Corrosion resistant type
*1
type.
*1
and high-emissivity
*3 type.
1
*2
coating
MT-94E-001-C
Page 9