Stp-Link And Display Unit; Stp-Link - Edwards STP-iS2207 Series Instruction Manual

6

STP-LINK and DISPLAY UNIT

The STP-Link (optional accessory) and the display unit iDT-001 (optional accessory) are available with
the STP pump.
The connector of the STP-Link (optional accessory) and the display unit iDT-001 (optional
accessory) are not waterproof and dust-proof. The "STP-LINK" connector (X5) of the STP pump is
waterproof and dust-proof when the cover is attached. When the STP-Link and display unit iDT-001
are connected, the waterproof and dust-proof state of the pump cannot be maintained. DO NOT
leave the STP-Link and display unit iDT-001 constantly connected to the pump in an environment
affected by dust and water splashes. There is a risk that the STP pump may fail.
6.1

STP-Link

The "STP-Link" is a Windows application for operating the STP pump, confirming the pump status or
setting various settings. Table 32 shows the principal functions.
See the Instruction Manual of the "STP-Link" for the detailed specification and operating method.
Item
Operating function
Confirmation function
Option setting function Remote operation mode setting
*1 Valid only with TMS function
STP-iS2207 Series Turbomolecular Pump
CAUTION
Start, stop and failure reset operation of STP pump
Operational state of STP pump
Software version
Serial number
STP pump model
Operation hours
Number of starts
Bearing damage integrated value
Error history
Serial port setting
Rotational speed setting
TMS function setting
Warning function setting
Table 32 - Functions of STP-Link
Functions
*1
6
MT-89E-001-C
Page 127