Troubleshooting the Emulator
Troubleshooting Guide
ping the emulation probe. (See "Verifying LAN Communications" on
page 38.)
• Initialize the emulation probe and target so that the debugger can
connect. Refer to your debugger manual for proper initialization.
• Refer to your debugger manual for proper operation.
If you need to obtain help
If, after following the troubleshooting steps and looking through the other
sections in this chapter, the emulation probe still is not working:
1 Write down the target processor version, the emulation probe firmware
version, and the type of emulation probe (E5900A or E5900B).
2 Call your nearest Agilent Technologies sales or service office.
To locate a sales or service office near you, go to http://www.tm.agilent.com
and select Assistance.
90
E5900B / E5901B User's Guide Supplement