Keypad Display; Stop Parameter Display State - IMO HD2 IP Series Instruction Manual

HD2 IP55 High-ingress Protection Series Inverters
Area
inverter station no.
Header C
and model display
area
The parameter name
Display D
Display E
monitored by the
inverter
Corresponding menu
Footer F of function key (4), (5)

5.3 Keypad display

The display state of HD2IP series keypad is divided into stop parameter display state, running
parameter display state and fault alarm display state.

5.3.1 Stop parameter display state

When the inverter is in stop state, the keypad displays stop state parameters, and this interface
is the main interface during power-up by default. Under stop state, parameters in various states
can be displayed. Press
16:02:35
Forward
Set frequency
P17.00 Hz
DC bus voltage
P17.11 V
Digital input terminal state
P17.12
Monitoring
Press or
progress bar display style.
Name
and function code
monitored by the
inverter
Parameter value
and (6)
or
Figure 5-3 Stop parameter display state
Local Ready 01: HD2IP
50.00
540.0
0x0000
About
Menu
to switch between different display styles, including list display style and
Displayed contents
inverter is in stop state (no fault); "Run" – The
inverter is in running state; "Jog"–The inverter is in
jogging state; "Pre-alarm"–the inverter is under pre-
alarm state during
running; "Fault"–inverter fault occurred.
1. Display inverter station no.: 01–99, applied in multi-
drive applications (reserved function);
2. inverter model display: "HD2IP–current inverter is
HD2IP series inverter.
Display the parameter name and corresponding function
code monitored by
parameters can be
monitoring
parameter list can be edited by the user
Display the parameter value monitoring by the inverter,
the monitoring value will be refreshed in real time
Corresponding menu of function key (4), (5) and (6). The
corresponding menu of function key (4), (5) and (6) varies
with interfaces, and the contents displayed in this area is
also different
to shift the displayed parameter up or down.
16:02:35 Forward
DC bus voltage
P17.11
Digital input terminal state
P17.12
Digital output terminal state
P17.13
Monitoring
-32-
Basic Operation Instructions
the inverter; three monitoring
displayed simultaneously.
Local Ready
540.0
V
0x0000
0x0000
About
The
01: HD2IP
Menu