P17 Group--State-Check Functions - IMO HD2 IP Series Instruction Manual

HD2 IP55 High-ingress Protection Series
P17 group––State-check functions
Function
code
Set frequency
P17.00
P17.01 Output frequency
Ramps reference
P17.02
Output voltage
P17.03
Output current
P17.04
P17.05
P17.06 Torque current
Exciting current
P17.07
P17.08
P17.09
Estimated motor
P17.10
P17.11 DC bus voltage
Name
Display current set frequency of the inverter.
Range:
Display current output frequency of the
inverter.
Range:
Display current ramps reference frequency
of the inverter.
frequency
Range:
Display current output voltage of the
inverter. Range: 0–1200V
Display the valid value of current output
current of the inverter.
Range: 0.0–5000.0A
Display current motor speed.
Motor speed
Range: 0–65535RPM
Display current torque current of the
inverter.
Range: -3000.0–3000.0A
Display current exciting current of the
inverter.
Range: -3000.0–3000.0A
Display current motor power; 100% relative
to rated motor power, positive value is
motoring state, negative value is generating
Motor power
state.
Range: -300.0–300.0% (relative to rated
motor power)
Display current output torque of the inverter;
100% relative to rated motor torque, during
forward running, positive value is motoring
Motor output state, negative value is generating state,
torque during reverse running, positive value is
generating state, negative value is motoring
state.
Range: -250.0–250.0%
The estimated motor rotor frequency under
open-loop vector condition.
frequency
Range:
Display current DC bus voltage of the
inverter.
Range: 0.0–2000.0V
Description
0.00Hz–P00.03
0.00Hz–P00.03
0.00Hz–P00.03
0.00–P00.03
-187-
Function parameter list
Default
Modify
value
●
50.00Hz
●
0.00Hz
●
0.00Hz
●
0V
●
0.0A
●
0 RPM
●
0.0A
●
0.0A
●
0.0%
●
0.0%
●
0.00Hz
●
0V