Product Specification - IMO HD2 IP Series Instruction Manual

HD2 IP55 High-ingress Protection Series inverter

3.3 Product specification

Function description
Power input
Power
output
Technical
control
performance
Running
control
performance
Input voltage (V)
Input current (A)
Input frequency (Hz) 50Hz or 60Hz, allowable range: 47–63Hz
Output voltage (V)
Output current (A)
Output power (kW) Refer to section 3.6
Output frequency
(Hz)
Control mode
Motor type
Speed regulation
ratio
Speed control
precision
Speed fluctuation
Torque response
Torque control
precision
Starting torque
Overload capacity
Frequency setup
mode
Automatic voltage
regulation function
Fault protection
function
Speed tracking
restart function
Retention at
transient voltage drop
Motor switchover
3PH 380V (-15%)–440V (+10%)
Depends on model; Section 3.6
0–input voltage
Refer to section 3.6
0–400Hz
SVPWM control, SVC, VC
Asynchronous motor, permanent-magnet synchronous
motor
Asynchronous motor 1: 200 (SVC); Synchronous motor
1: 20 (SVC) , 1:1000 (VC)
±0.2% (SVC), ±0.02% (VC)
± 0.3% (SVC)
<20ms SVC) , <10ms (VC)
10% (SVC) , 5% (VC)
Asynchronous motor: 0.25Hz/150% (SVC)
Synchronous motor: 2.5 Hz/150% (SVC)
0Hz/200% (VC)
Constant Torque Mode:
150% of rated current: 1min;
180% of rated current: 10s;
200% of rated current: 1s;
Variable Torque Mode:
120% of rated current: 1min;
Digital, analog, pulse frequency, multi-step speed
running, simple PLC, PID, Modbus communication,
PROFIBUS communication, etc;
Realize switch-over between the set combination and
the set channel
Keep the output voltage constant when grid voltage
changes
Fault protection function
Provide over 30 kinds of fault protection functions:
overcurrent,
over-temperature, phase loss and overload, etc
Realize impact-free starting of the motor in rotating.
Keeps running with regenerative energy when the grid
transiently drops.
Supports two groups of motor parameters to control
motor switchover.
-8-
Product Overview
Specification
overvoltage, undervoltage,