P08 Group--Enhanced Functions - IMO HD2 IP Series Instruction Manual

HD2 IP55 High-ingress Protection Series
Function
code
Acceleration
P08.00
Deceleration
P08.01
Acceleration
P08.02
Deceleration
P08.03
Acceleration
P08.04
Deceleration
P08.05
P08.06 frequency of
Acceleration
P08.07
time of jogging
Deceleration
P08.08
time of jogging
Jump frequency
P08.09
Jump frequency
P08.10
amplitude 1
Jump frequency
P08.11
Jump frequency
P08.12
amplitude 2
Jump frequency
P08.13
Jump frequency
P08.14
amplitude 3
P08 group––Enhanced functions
Name
time 2
See P00.11
definitions.
time 2
The
protectionhigh-ingress protectionGoodrive350
time 3
series
acceleration/deceleration time, which can be
time 3
selected by multi-function digital input terminal
(P05 group). The acceleration/deceleration
time 4 time of the inverter is the first group by default.
Setting range: 0.0–3600.0s
time 4
This function code is used to define the
Running reference frequency of the inverter during
jogging.
jogging Setting range:
frequency)
Jogging acceleration time is the time needed
for the inverter to accelerate from 0Hz to max.
output frequency (P00.03).
Jogging deceleration time is the time needed
from decelerating from the max. output
frequency (P00.03) to 0Hz.
Setting range: 0.0–3600.0s
When the set frequency is within the range of
1 jump frequency, the inverter will run at the
boundary of jump frequency.
The inverter can avoid mechanical resonance
point by setting the jump frequency, and three
jump frequency points can be set. If the jump
2
frequency points are set to 0, this function will
be invalid.
3
Setting range:
frequency)
Description
and P00.12
HD2 IP55
inverter defines four
0.00Hz–P00.03
0.00Hz–P00.03
-159-
Function parameter list
Default
value
Depend
on model
for detailed
Depend
on model
high
Depend
on model
groups of
Depend
on model
Depend
on model
Depend
on model
5.00Hz
(max. output
Depend
on model
0.00Hz
0.00Hz
0.00Hz
0.00Hz
0.00Hz
0.00Hz
(max. output
Modify
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○