Application Standards; Ce Marking; Emc Compliance Declaration; Emc Regulations - IMO HD2 IP Series Instruction Manual

HD2 IP55 High-ingress Protection Series Inverter
B.5 Application standards
The following table describes the standards that the inverters comply with.
EN/ISO 13849-1
IEC/EN 60204-1
IEC/EN 62061
IEC/EN 61800-3
IEC/EN 61800-5-1
IEC/EN 61800-5-2
GB/T 30844.1
GB/T 30844.2
GB/T 30844.3
B.5.1 CE marking
The CE marking on the name plate of a inverter indicates that the inverter is CE-compliant,
meeting the regulations of the European low-voltage directive (2014/35/EU) and EMC directive
(2014/30/EU).
B.5.2 EMC compliance declaration
European union (EU) stipulates that the electric and electrical devices sold in Europe cannot
generate electromagnetic disturbance that exceeds the limits stipulated in related standards,
and can work properly in environments with certain electromagnetic interference. The EMC
product standard (EN 61800-3) describes the EMC standards and specific test methods for
adjustable speed electrical power drive systems. Our products have been compliant with these

EMC regulations.

B.6 EMC regulations
The EMC product standard (EN 61800-3) describes the EMC requirements on
inverters. Application environment categories
Category I: Civilian environments, including application scenarios where inverters are directly
connected to the civil power supply low-voltage grids without intermediate transformers
Category II: All environments except those in Category I.
inverter categories
C1: Rated voltage lower than 1000 V, applied to environments of Category I.
C2: Rated voltage lower than 1000 V, non-plug, socket, or mobile devices; power drive systems
that must be installed and operated by specialized personnel when applied to environments of
Category I.
Safety of machinery––Safety-related parts of control systems––Part
1: General principles for design
Safety of machinery––Electrical equipment of machines. Part 1:
General requirements
Safety of machinery––Safety-related functional safety of electrical,
electronic, and programmable electronic control systems
Adjustable speed electrical power drive systems––Part 3:EMC
requirements and specific test methods
Adjustable speed electrical power drive systems––Part 5-1: Safety
requirements—Electrical, thermal and energy
Adjustable speed electrical power drive systems––Part 5-2: Safety
requirements––Function
General-purpose variable-frequency adjustable-speed equipment of
1 kV and lower—Part 1: Technical conditions
General-purpose variable-frequency adjustable-speed equipment of
1 kV and lower—Part 2: Test methods
General-purpose variable-frequency adjustable-speed equipment of
1 kV and lower—Part 3: Safety regulations
-316