List Edit - IMO HD2 IP Series Instruction Manual

HD2 IP55 High-ingress Protection Series Inverters
First-level
Motor
parameter
autotuning
Parameter
backup/restor
e default
value
System setup

5.4.2 List edit

The monitoring items displayed in the parameter list of stop state can be added by users as
needed (through the menu of the function code in state check group), and the list can also be
edited by users eg "shift up", "shift down" and "delete from the list". The edit function is shown
in the interface below.
Second-level
/ /
Operate the storage area 1:
BACKUP01
/
Operate the storage area 2:
BACKUP012
Operate the storage area 3:
BACKUP03
Restore function parameter
to default value
/ /
Third-level
-38-
Basic Operation Instructions
Fourth-level
Pxx.xx has modified parameter
2
Pxx.xx has modified parameter
xx
Complete parameter
autotuning
Complete parameter
autotuning
Partial parameter
autotuning
Upload local
parameter to keypad
Download complete
function parameter
Download key
parameters which are not in
motor group
Download keypad
parameters which are in motor
group
Ensure to restore
parameters to default value?
Language selection
Time/date
Backlight brightness regulation
Backlight time adjustment
Power-on guiding enable
Power-on guiding settings
Keyboard burning selection
Fault time enable
Control board burning selection
rotary
static
static
function
keypad
function
function
function