Standard Wiring Of Control Circuit; Wiring Diagram Of Basic Control Circuit - IMO HD2 IP Series Instruction Manual

HD2 IP55 High-ingress Protection Series

4.4 Standard wiring of control circuit

4.4.1 Wiring diagram of basic control circuit

Note: If wire-passing board outlet space is insufficient when all terminals on the control board
are wired, cut the knock-out hole on the lower cover for wire outlet. If a dangerous situation
occurs when the knock-out hole is cut for a purpose but not wire outlet, we will not bear any
responsibility.
Figure 4-15 Wiring diagram of control circuit
-24-
Installation Guide