Standard Wiring - IMO iDrive2 XKL Instruction Manual

iDrive2 inverters
3.1.4 Installation space
Note: Fan cooled drives can be mounted side by side, natural cooled drives require 30mm clearance (Dim A)
A minimum clearance of 100mm is required above and below the drive (Dim B).

3.2 Standard wiring

3.2.1 Connection diagram of main circuit
Note:
 The fuse, DC reactor, braking resistor, input reactor, input filter, output reactor, output filter are optional
parts. Please refer to Peripheral Optional Parts for detailed information.
3.2.2 Terminals figure of main circuit
Terminal
sign
L1/R
L2/S Power input of the main circuit
T
U
V The inverter output
W
PB Braking resistor terminal
Fig 3-2 Installation space
Diagram 3-3 Connection diagram of main circuit
R/L1 S/L2 T
Fig 3-4 Terminals of main circuit
Terminal name
(+) PB U V W
3-phase/1-phase AC input terminals are generally connected
to the incoming supply.
3-phase AC output terminals are generally connected to the
motor.
PB and (+) are connected to an external resistor.
14
Installation Guidelines
Function