Clustering Management Configuration - ZyXEL Communications GS2220 Series User Manual

Table 228 Management > Cluster Management Status (continued)
L ABEL
Model
Status
51.3 C luste ring Ma na g e m e nt C o nfig ura tio n
Use this screen to configure clustering management. Click
C o nfig ura tio n
Fig ure 333
The following table describes the labels in this screen.
Table 229 Management > Cluster Management > Configuration
L ABEL
Clustering Manager
Active
Name
DESC RIPT IO N
This field displays the model name.
This field displays:
(the cluster member Switch is accessible)
O nline
(for example the cluster member Switch password was changed or the Switch was set as
Erro r
the manager and so left the member list, and so on)
(the Switch is disconnected –
O ffline
between cluster member and manager goes down)
to display the next screen.
Management > Cluster Management > Configuration
DESC RIPT IO N
The following fields relate to configuring the cluster manager.
Select to have this Switch become the cluster manager switch. A cluster can only
Ac tive
have one manager. Other (directly connected) switches that are set to be cluster
managers will not be visible in the
cluster member is later set to become a cluster manager, then its
in the
C luste r Ma na g e m e nt Sta tus
summary list below.
Type a name to identify the
(spaces are allowed).
GS2220 Series User's Guide
shows approximately 1.5 minutes after the link
O ffline
Ma na g e m e nt
C luste ring C a ndida te s
screen and a warning icon (
You may use up to 32 printable characters
C luste ring Ma na g e r.
435
>
C luste r Ma na g e m e nt
list. If a switch that was previously a
is displayed as
Sta tus
) appears in the member
>
Erro r