Dhcpv4 Option 82 Profile; Add/Edit A Dhcpv4 Option 82 Profile - ZyXEL Communications XMG1930-30 User Manual

62.4 DHCPv4 Option 82 Profile

Use this screen to view and configure DHCPv4 option 82 profiles. Click NETWORKING > DHCP > DHCPv4
Relay > DHCP Option 82 Profile link to display the screen as shown.
Figure 305 NETWORKING > DHCP > DHCPv4 Relay > DHCP Option 82 Profile
The following table describes the labels in this screen.
Table 236 NETWORKING > DHCP > DHCPv4 Relay > DHCP Option 82 Profile
LABEL
Profile Name
Circuit-ID
Enable
Field
Remote-ID
Enable
Field
Add/Edit
Delete

62.4.1 Add/Edit a DHCPv4 Option 82 Profile

Use this screen to create DHCPv4 option 82 profiles. Click Add/Edit, or select an entry and click Add/Edit
in the NETWORKING > DHCP > DHCPv4 Relay > DHCP Option 82 Profile link to display this screen.
Figure 306 NETWORKING > DHCP > DHCPv4 Relay > DHCP Option 82 Profile > Add/Edit
Note: The string of any field in this screen should not contain [ ? ], [ | ], [ ' ], [ " ] or [ , ].
Chapter 62 DHCP
DESCRIPTION
This field displays the descriptive name of the profile.
This section displays the Circuit ID sub-option including information that is specific to the relay
agent (the Switch).
This field displays whether the Circuit ID sub-option is added to client DHCP requests.
This field displays the information that is included in the Circuit ID sub-option.
This section displays the Remote ID sub-option including information that identifies the relay
agent (the Switch).
This field displays whether the Remote ID sub-option is added to client DHCP requests.
This field displays the information that is included in the Remote ID sub-option.
Select an entry's check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Click Add/Edit to add a new entry or edit a selected one.
Click Delete to remove the selected entries.
XMG1930 Series User's Guide
429