Zon Utility; C Ha Pte R 4 Zo N Utility; Zyxel One Network (Zon) Utility Screen; Requirements - ZyXEL Communications GS1900 Series User Manual

This chapter describes the screens for ZON Utility.
4.1 Zyxe l O ne Ne two rk (ZO N) Utility Sc re e n
ZON Utility is a program designed to help you deploy and manage a network more efficiently. It detects
devices automatically and allows you to do basic settings on devices in the network without having to
be near it.
The ZON Utility issues requests through Zyxel Discovery Protocol (ZDP) and in response to the query, the
device responds back with basic information including IP address, firmware version, location, system
and model name in the same broadcast domain. The information is then displayed in the ZON Utility
screen and you can perform tasks like basic configuration of the devices and batch firmware upgrade
in it. You can download the ZON Utility at www.zyxel.com and install it on a PC (Windows operating
system).
4.1.1 Re q uire m e nts
Before installing the ZON Utility on your PC, please make sure it meets the requirements listed below.
O pe ra ting Syste m
At the time of writing, the ZON Utility is compatible with:
• Windows 7 (both 32-bit / 64-bit versions)
• Windows 8 (both 32-bit / 64-bit versions)
• Windows 8.1 (both 32-bit / 64-bit versions)
• Window 10 (both 32-bit / 64-bit versions)
Note: To check for your Windows operating system version, right-click on
Pro pe rtie s
Note: It is suggested that you install Npcap, the packet capture library for Windows operating
systems, and remove WinPcap or any other installed packet capture tools before you
install the ZON utility.
Ha rdwa re
Here are the minimum hardware requirements to use the ZON Utility on your PC.
Chapter 4 ZON Utility
. You should see this information in the
GS1900 Series User's Guide
C
HA PTER
ZO N Utility
G e ne ra l
40
My C o m pute r
tab.
4
>