Table of Contents
Advertisement
From Nebula-managed to Standalone
To return to direct management standalone mode, remove (unregister) the Switch from the inventory in
the Nebula web portal.
Note: When you change the Switch's management mode from Nebula-manged mode to
standalone mode, the Switch will reboot and restore its factory-default settings.
To unregister the Switch:
Go to the Nebula Control Center (https://nebula.zyxel.com).
1
Go to the Organization-wide > License & inventory > Devices screen.
2
Select the Switch you want to remove (unregister) from the organization.
3
Click Actions, then click Remove from organization.
4
It will take a while for the Switch to reboot and reset to factory default.
1.1.5 ZON Utility
With its built-in Web Configurator, including the Neighbor Management feature
134), viewing, managing and configuring the Switch and its neighboring devices is simplified.
In addition, Zyxel offers a proprietary software program called Zyxel One Network (ZON) Utility, it is a
utility tool that assists you to set up and maintain network devices in a more simple and efficient way.
You can download the ZON Utility at www.zyxel.com and install it on a PC (Windows operation system).
For more information on ZON Utility see
1.1.6 Web Configurator Networked AV Mode
Aside from the Web Configurator in Standard mode, you can switch to Networked AV mode that is
specifically designed to simplify configuration and management of the Switch for AVoIP (Audio-Video
over Internet Protocol) application. In AV over IP, the AV transmitter is the transmitter, the AV receiver is
the receiver, and the matrix switch is a standard IP Switch. See
using the Setup Wizard screen for configuring the Switch's Networked AV mode's basic and advanced
settings.
Chapter 1 Getting to Know Your Switch
Section 4.3 on page
XMG1930 Series User's Guide
35
(Section 13.1 on page
63.
Section 4.5 on page 77
for details on
Advertisement
Table of Contents
Troubleshooting
