MacDon M Series Assembly Instructions Manual page 48

j. Attach stud (supplied with radio) to center rear of
radio.
k. Attach support (D)
to stud on back of
radio chassis with
lock washer and
metric nut (C) that
was supplied with
the support.
Support can be
attached to
chassis in multiple
locations to allow
for proper mounting of radio.
l. Reinstall radio panel with original screws.
J
m. Adjust bracket (J) if necessary by loosening nuts
(K) to allow radio to slide into opening, and
securely capture support (D).
n. Turn ignition key to ACC, switch on the radio
and check operation
instructions supplied with the radio.
Form # 169242
UNLOADING AND ASSEMBLY
C
D
D
K
in accordance with
46 Model Year - 2009