MacDon M Series Assembly Instructions Manual page 32

h. Remove one cap on tee fitting and quickly attach
hose to minimize oil spillage.
i. Remove second cap from tee and quickly
connect other hose.
j. Tighten fittings.
k. Locate hose bundle from valve blocks on LH
side of frame. Route hose ends with electrical
harness through hose support.
Form # 169242
UNLOADING AND ASSEMBLY
l.
m. Attach reel hose support tube to the RH reel leg
30
Disengage hook and rotate to up position.
Position hose bundle over hose support and
locate under hook. Rotate hook and re-engage
in bracket.
with two 3/8 in.x1.0 carriage bolts and nuts.
Model Year - 2009