Step 15. Install Platforms - MacDon M Series Assembly Instructions Manual

STEP 15. INSTALL PLATFORMS

NOTE
The following procedure is applicable
to the M150 and M200 machines with
LH and RH platforms. The M100 has
a LH platform only. RH installation is
shown, LH installation is opposite.
a. Remove shipping
assembly. Retain hardware.
b. Position platform so that the base is on the floor.
c. Attach a sling to platform and other end to lifting
device.
CAUTION
Stand clear when lifting, as platform may
swing.
Form # 169242
UNLOADING AND ASSEMBLY
brackets from platform
d. Position platform against windrower tractor
frame
e. Attach main beam of platform to side frame with
three ½ in.x1.25 lg. carriage bolts. Bolt heads
face inboard.
adjustment.
f. Attach steering arm to frame with two 3/8
in.x0.75 lg. carriage bolts and nuts. Bolt heads
face inboard. Tighten bolts.
34
Tighten just enough
(continued next page)
Model Year - 2009
for