Header Attachment - R Series (M150, M200 Only) - MacDon M Series Assembly Instructions Manual

C. HEADER ATTACHMENT – R SERIES
(M150, M200 ONLY)
a. Remove hairpin from pin (A), and remove pin
from on left and right header boots (B) on
header.
CAUTION
Check to be sure all bystanders have cleared
the area.
HEADER
TILT DOWN
HEADER DOWN
b. Start the engine and activate header down
button on the GSL to fully retract header lift
cylinders.
Form # 169242
UNLOADING AND ASSEMBLY
A
HEADER UP
HEADER TILT UP
c. Slowly drive windrower tractor forward so that
feet (C) on tractor enter boots (B) on the header.
Continue to drive slowly forward until feet
engage the boots, and header nudges forward.
d. Connect center link as follows:
B
MECHANICAL LINK - M150
Stop engine and remove key from ignition
before leaving operator's seat for any
reason. A child or even a pet could engage
an idling machine.
1. Stop engine and remove key.
2. Loosen nut (D) and rotate barrel (E) to
adjust length so that other end lines up with
header bracket.
55
C
B
DANGER
D
E
(continued next page)
Model Year - 2009