MacDon M Series Assembly Instructions Manual page 33

B. M100
a. Connect hoses as follows using coloured plastic
cable ties as a guide.
111324 GREEN
1. Locate two hoses 111324 (green ties) in
frame opening, and existing tee fitting (green
tie) on the hose from the valve block.
2. Remove caps on green lines and tee, and
make connections. Tighten fittings.
Remove caps on tee last to minimize
oil loss.
3. Position hoses into frame.
4. Locate two hoses (white ties) inside frame
and hose 111324 with tee (white tie).
5. Remove caps, make connections, and
tighten fittings.
6. Push hoses into frame.
Form # 169242
UNLOADING AND ASSEMBLY
NOTE
111328 WHITE 'T'
7. Locate two hoses (red ties) inside frame.
8. Route RH hose behind bundle.
9. Remove caps, make connection and tighten
fitting.
10. Push hose into frame.
11. Retrieve long hose 119328 (white tie) and
route through hole in LH frame.
12. Remove caps on hose and valve block fitting
(white tie) and make connection.
fitting.
31
RED
119328 WHITE
WHITE
(continued next page)
Model Year - 2009
Tighten