Gear Box Lubricant Level (M150, M200); A/C Compressor Belt; Fan Belt (M100) - MacDon M Series Assembly Instructions Manual

G. GEAR BOX LUBRICANT LEVEL (M150,
M200)
IMPORTANT
Do not add oil to M100 gearbox.
a. Remove plug. The lubricant should be visible
through the hole or slightly running out.
b. Replace plug and tighten.
H. A/C COMPRESSOR BELT
M150, M200
a. Tension on A/C compressor belt should be such
that a force of 8 to 12 lbf (35-55 N) deflects the
belt 3/16 inch (5 mm) at mid-span.
Form # 169242
PRE-DELIVERY CHECKS
I. FAN BELT (M100)
a. Tension on fan belt should be such that a force
78
M100
M100
of 22 lbf (100 N) deflects belt (B) 5/16 to 1/2 inch
(8 to 12 mm) at mid-span.
NOTE
The M150 and M200 engines utilize
an automatic belt tightening system.
Model Year - 2009