MacDon M Series Assembly Instructions Manual page 35

h. Bundle traction drive hoses and secure with two
plastic cable ties at 7-3/4 inch (200 mm)
intervals from frame opening.
i. Bundle smaller hoses and secure with two
plastic cable ties at 6 inch (150 mm) intervals
from frame opening.
j. Attach hose supports to tractor frame as follows:
1. Locate hose bundle from valve blocks on LH
side of frame.
electrical harness through hose support.
Form # 169242
UNLOADING AND ASSEMBLY
Route hose ends with
2. Disengage hook and rotate to up position.
Position hose bundle over hose support and
locate under hook.
engage in bracket.
3. Attach reel hose support tube to the RH reel
leg with two 3/8 in.x1.0 carriage bolts and
nuts.
33
Rotate hook and re-
Model Year - 2009