Step 13. Install Caster Wheels - MacDon M Series Assembly Instructions Manual

STEP 13. INSTALL CASTER
WHEELS
a. Remove the two guide plates from ends of
walking beam.
b. Support shipping frame channel and remove
bolts attaching shipping frame to walking beam
and mainframe side rail.
frame.
Shipping frame does not need to be
removed if air bag lifting stand is
used. Ensure bolts are removed prior
to moving windrower tractor off stand.
c. Repeat above for opposite shipping frame
channel.
Form # 169242
UNLOADING AND ASSEMBLY
Remove shipping
NOTE
d. Remove tie bar between the two caster wheels.
e. Remove the two braces from caster wheels and
frame.
f. Attach a chain to RH caster and support caster
with lifting device.
25
(continued next page)
Model Year - 2009